- 277 Volt
Product Description
This is a Dimplex disconnect switch rated 277 volts.
Get Best Price & More info : Dimplex #RFAD 277 Volt Disconnect Switch
Get Best Price & More info : Sunglo 24 Volt Outdoor Natural Gas Patio Heater
Get Best Price & More info : 220 Volt (NOT USA COMPLIANT) Wattindchaser Heater 500 Watt
Product Description
This is our Infratech 33” Electric Radiantl Garage/Warehouse Heater, with 1500 watts and 120 volts, providing maximum efficiency, a simple low cost installation, and a stainless steel or standard powder coat finish available. Patioshoppers.com!!!!!
Get Best Price & More info : Infratech 33″ 1500 Watt 120 Volt Electric Radiant Outdoor Heater
- With its spiral finned elements and sealed ball-bearing motor this heavy duty industrial unit heater
- Ceiling hanger bracket included, optional wall bracket available (allows swivel movement)
- Five-way adjustable louvers to direct airflow
- Heating Element: The heating element has a metal tubular sheath fused with spiral steel fins and contains a high quality nickel-chromium wire, encased in solidly packed magnesium oxide insulation
- Fan and Motor: The fan size and pitch is matched to the power and speed of the unit, to optimize CFM, air throw, temperature rise, and quietness
Product Description
This Dimplex industrial unit heater has spiral finned elements and a sealed ball-bearing motor. The ceiling hanger bracket is included and optional wall bracket is available (allows swivel movement). The five-way adjustable louvers to direct airflow. The heating element has a metal tubular sheath fused with spiral steel fins and contains a high quality nickel-chromium wire, encased in solidly packed magnesium oxide insulation. The fan size and pitch is matched to the power and speed of the unit, to optimize CFM, air throw, temperature rise, and quietness. The motor is heavy duty, continuous operation, totally enclosed, thermally protected with permanently lubricated ball bearings. The motor is heavy duty, continuous operation, totally enclosed, thermally protected with permanently lubricated ball bearings.
Get Best Price & More info : Dimplex #EUH10B34CT 10/7.5 Kilowatt 240/208 Volt 1-3 Phase Industrial Unit Heat
- Commercial Grade high temperature manual reset with 25 Amp rating at 240 Volt
- Fan delay iliminates cold draft on startup and disperses residual heat on shutdown
- Fan only control for cool air circulation
- High/low switch for wattage control
- 6 Foot cord with polarized plug
Product Description
No returns on Electric components.
Office Hours
10:00 – 3:30 Mon – Fri.
Eastern Standard Time
Get Best Price & More info : Cadet The Hot One Shop Heater 240 Volt
- With its spiral finned elements and sealed ball-bearing motor this heavy duty industrial unit heater
- Ceiling hanger bracket included, optional wall bracket available (allows swivel movement)
- Five-way adjustable louvers to direct airflow
- Heating Element: The heating element has a metal tubular sheath fused with spiral steel fins and contains a high quality nickel-chromium wire, encased in solidly packed magnesium oxide insulation
- Fan and Motor: The fan size and pitch is matched to the power and speed of the unit, to optimize CFM, air throw, temperature rise, and quietness
Product Description
This Dimplex industrial unit heater has spiral finned elements and a sealed ball-bearing motor. The ceiling hanger bracket is included and optional wall bracket is available (allows swivel movement). The five-way adjustable louvers to direct airflow. The heating element has a metal tubular sheath fused with spiral steel fins and contains a high quality nickel-chromium wire, encased in solidly packed magnesium oxide insulation. The fan size and pitch is matched to the power and speed of the unit, to optimize CFM, air throw, temperature rise, and quietness. The motor is heavy duty, continuous operation, totally enclosed, thermally protected with permanently lubricated ball bearings. The motor is heavy duty, continuous operation, totally enclosed, thermally protected with permanently lubricated ball bearings.
Get Best Price & More info : Dimplex #EUH05B31T 5/3.8 Kilowatt 240/208 Volt 1 Phase Industrial Unit Heater
- RFI series heater is ideal for maintaining comfort in areas subject to cold drafts, such as vestibules, stairwells, etc
- Construction: The front panel is constructed of 20 gauge steel. The wall box is designed for recessing into either frame or masonry walls and contains knockouts for wiring connections
- Fan and Motor: The fan motor is totally enclosed and factory lubricated complete with a black anodized 5 blade mixed flow aluminum fan and the fan delay is a bi-metallic snap action type.
- Controls and Wiring: The heater is a standard double poll built-in thermostat with provision for low voltage relay and remote wall stat if required. Unit is suitable for use with remote line voltage wall thermostat.
- Automatic fan delay utilizes when unit cycles off
Product Description
This Dimplex RFI series heater is ideal for maintaining comfort in areas subject to cold drafts, such as vestibules, stairwells, etc. Available in either Almond or White with a polyester epoxy powder coat painted finish. The front panel is constructed of 20 gauge steel. The wall box is designed for recessing into either frame or masonry walls and contains knockouts for wiring connections. The fan motor is totally enclosed and factory lubricated complete with a black anodized 5 blade mixed flow aluminum fan. The fan delay is a bi-metallic snap action type. The heater is a standard double poll built-in thermostat with provision for low voltage relay and remote wall stat if required. Unit is suitable for use with remote line voltage wall thermostat. The automatic fan delay activates when unit cycles off.
Get Best Price & More info : Dimplex #RF1820D41 2000-Watt 277 Volt Commercial Fan Forced Wall Heater 8824 BTU
- With its spiral finned elements and sealed ball-bearing motor this heavy duty industrial unit heater
- Ceiling hanger bracket included, optional wall bracket available (allows swivel movement)
- Five-way adjustable louvers to direct airflow
- Heating Element: The heating element has a metal tubular sheath fused with spiral steel fins and contains a high quality nickel-chromium wire, encased in solidly packed magnesium oxide insulation
- Fan and Motor: The fan size and pitch is matched to the power and speed of the unit, to optimize CFM, air throw, temperature rise, and quietness
Product Description
This Dimplex industrial unit heater has spiral finned elements and a sealed ball-bearing motor. The ceiling hanger bracket is included and optional wall bracket is available (allows swivel movement). The five-way adjustable louvers to direct airflow. The heating element has a metal tubular sheath fused with spiral steel fins and contains a high quality nickel-chromium wire, encased in solidly packed magnesium oxide insulation. The fan size and pitch is matched to the power and speed of the unit, to optimize CFM, air throw, temperature rise, and quietness. The motor is heavy duty, continuous operation, totally enclosed, thermally protected with permanently lubricated ball bearings. The motor is heavy duty, continuous operation, totally enclosed, thermally protected with permanently lubricated ball bearings.
Get Best Price & More info : Dimplex #EUH03B31T 3 Kilowatt 240/208 Volt Industrial Unit Heater
- RFI series heater is ideal for maintaining comfort in areas subject to cold drafts, such as vestibules, stairwells, etc
- Construction: The front panel is constructed of 20 gauge steel. The wall box is designed for recessing into either frame or masonry walls and contains knockouts for wiring connections.
- Fan and Motor: The fan motor is totally enclosed and factory lubricated complete with a black anodized 5 blade mixed flow aluminum fan
- Controls and Wiring: The heater is a standard double poll built-in thermostat with provision for low voltage relay and remote wall stat if required and is suitable for use with remote line voltage wall thermostat
- Automatic fan delay utilizes when unit cycles off
Product Description
This Dimplex RFI series heater is ideal for maintaining comfort in areas subject to cold drafts, such as vestibules, stairwells, etc. Available in either Almond or White with a polyester epoxy powder coat painted finish. The front panel is constructed of 20 gauge steel. The wall box is designed for recessing into either frame or masonry walls and contains knockouts for wiring connections. The fan motor is totally enclosed and factory lubricated complete with a black anodized 5 blade mixed flow aluminum fan. The fan delay is a bi-metallic snap action type. The heater is a standard double poll built-in thermostat with provision for low voltage relay and remote wall stat if required. Unit is suitable for use with remote line voltage wall thermostat. The automatic fan delay activates when unit cycles off.
Get Best Price & More info : Dimplex #RF1815D31 1500/1125 Dual-Watt 240/208 Volt Commercial Fan Forced Wall Heater 5118/3840 BTU