Quiet, vented heater for residential and commercial use easily heats 2- to 3-car garage. Requires only 1in. clearance from ceiling with 2 included angle brackets which means heater is up and out of the way. Power exhaust allows for vertical or horizontal venting. Low-profile cabinet measures 25 1/2in.L x 19in.W x 12in.H. Customers are responsible for checking their local codes and Ordinances for approved installation and usage. Venting kit required (sold separately, Item#s 173640 or 173642). Optional thermostat also available (sold separately, Item# 173641). Heating Application: Construction, Garage, BTU Output: 45,000, Vent-Free: No, Heating Capability (sq. ft.): 700, Blower Included: Yes, Blower (CFM): 750, Blower Power Supply (Volts, Amps): 115, Fuel Type: Propane, Fuel Consumption (gal./hr.): N/A thermastatically controlled, Igniter: Spark, Thermostat Included: No, Remote Included: No, Oxygen Depletion Sensor: No, Dimensions L x W x H (in.): 25 1/2 x 19 x 12 Heats 2- to 3-car garage Requires only 1in. clearance from ceiling Power exhaust allows for horizontal or vertical venting Designed for right or left side piping, electrical and flue connections by simply rotating 180
features and benefits: accurate fast inexpensive way to recharge a/c systems using bulk refrigerant economical – saves time and money fast – built in heater pushes refrigerant into system easy to use sight glass lets you see the amount of refrigerant in the cylinderdial-a-charge refrigerant gauge from robinair! calibrated shrouds make accurate charging simple and the charge is measured by weight for greatest accuracy. using the calibrations in conjunction with the pressure gauge you can easily compensate for volume fluctuations that occur as the ambient temperature changes just by “re-dialing” the shroud. heated cylinders help speed the transfer of refrigerant by overcoming the equalization of pressure between the system and the charging cylinder. this reduces the time required for a complete charge. charges by volume; calibrations on the shroud make it easy to charge the exact amount required. comes in durable polyethylene case for protection during storage and transit. cylinder snaps in and out of the case and can be stored either vertically or horizontally. for safety all cylinders come with pressure relief valves; they automatically reset when a safe working pressure is restored. 5lb./2200 gram 110v acme fittings.
Low intensity infrared radiant heat is the most effective and efficient way to add comfort for 2- and 3-car garages, workshops, decks, patios, entryways, greenhouses, farm buildings, ski lodges, bus shelters and more. 3in. aluminized steel U-tube design provides uniform heat distribution. U.S.A. Heating Application: Construction, Garage, BTU Output: 45,000, Vent-Free: No, Heating Capability (sq. ft.): 700, Blower Included: No, Blower Power Supply (Volts, Amps): 120, Fuel Type: Propane, Igniter: Electronic, Thermostat Included: No, Remote Included: No, Oxygen Depletion Sensor: No, Dimensions L x W x H (in.): 14.5 x 10.75 x 15.5 Propane 3in. aluminized steel U-tube design Polished aluminum deep-dish reflector Commercial and residential approved CSA certified for indoor and outdoor applications Installs easily allowing for horizontal or angle mounting and vertical or horizontal venting (vent kit sold separately Item# 173640) Thermostat sold separately Item# 173649 10-ft. overall length Shipped in 2 cartons
Isotemp Water Heaters Designed expressly for marine use, the advanced design of these water heaters represents a welcome departure from traditional upright cylinders and box-like designs of the past. These heaters feature containment vessels of 316 stainless steel, NOT corrosion-prone aluminum. Slim 15, Basic 24 and Basic 40 models may be mounted vertically or horizontally and are secured by stainless steel mounting feet which rotate to achieve the hose lead you wish. Engine water heat exchanger coils are extra long for faster heating and AC heating elements are nickel-coated copper for long life. All models feature foam insulation for excellent heat retention and incorporate service thermostats set to 160 F to prevent the risk of bacteria. All include thermostatically controlled mixing valves to prevent scalding, reduce waste, and assure that water reaches the tap at the temperature you wish. Material: Storage tank and connections: 316 stainless steel; Heating coil: nickel-plated copper; cover and mounting feet: 304 stainless steel Port Sizes: Freshwater inlet & outlet fittings are 1/2″BSP (1/2″NPT adapter fittings included); heat exchanger inlet & outlets are 1/2″NPT Draw: 6.5A at 115V AC Warranty: One year warranty on parts and labor; five years limited warranty on tank
The Z-Flex 4 Condensation Vertical Drain (model: 2SVEVWCF04) is recommended for installation of Rheem tankless units and can be used in exhaust vents that terminate vertically (through the roof). In order to prevent condensate from draining back into the water heater, it is recommended that the condensate drain be installed as close as practical to the water heater vent connection and at the base of the vertical run. For use with the Rheem RTG74 and GT199 model heaters.