- A steel tubular heater?s durability and the excellent heat transfer abilities of aluminum fins are combined into the heating element.
- The rounded ends at the top and front of the unit eliminate rounded ends.
- Blends in with most interior decor with Navajo white enamel finish.
- Has a chimney fin element for maximum air circulation.
- Built in cable clamp included for fast and easy wiring.
Product Description
The Q-Mark 2513W Electric Baseboard Heater combines the durability of a steel tubular heater and the excellent heat transfer capabilities of aluminum fins into one exclusive heating element design. For increased safety and a contemporary design, the top and front ends of the heater have rounded ends, eliminating sharp corners.
For a heater that is easily installed without disassembly, purchase the Q-Mark 2513W electric baseboard heater. There are mounting holes in the rear of the cabinet, lead wires for quick connection to the ends of the heater, and knockouts at each ends for convenient installation. There are also ground wire pigtails included in each box and a continuous capillary tube safety thermal cutout protection in case there is air flow blockage. A Built-in cable clamp is included as well to restrain incoming cables without using additional hardware.
For maximum air flow, there is a chimney fin element on the Q-Mark 2513W electric baseboard heater. The air flow is also directed away from the walls so that walls do not end up with damage or discoloration. Also, to keep the lovely appearance of your home intact, this heater comes in a Navajo white enamel finish that complements the decor of any home.
Get Best Price & More info : Q-Mark 2513W Electric Baseboard Heater With 750 Watts
- There are mounting holes in the rear of the cabinet for fast and easy installation.
- There is no popping and pinging that is usually associated with baseboards.
- In case of air flow blockage, there is safety thermal cutout protection.
- Built in cable clamp included for fast, easy wiring.
- The air flow is directed away from the walls by the chiminey fin element to prevent wall soiling.
Product Description
The Q-Mark 2546W Electric Baseboard Heater is easily installed without disassembly. Designed for quiet operation, there is no popping and pinging normally associated with baseboard heaters. This baseboard heater also has built-in safety thermal cut-off protection.
With the easy out knockouts at each end of the Q-Mark 2546W baseboard heater you will have convenient wiring. Knockouts inside the wiring compartment allow field installation of optical raceway kit from end to end, forming UL listed wiring. The heater is UL listed for installation on walls at floor level with wall-to-wall carpeting.
The 2546W baseboard heater stands unsupported during installation. The Navajo white enamel finish retains an attractive appearance and is compatible with all interior decors. The pre-notched mounting guide marks for fast and easy installation without disassembling the unit.
Get Best Price & More info : Q-Mark 2546W Electric Baseboard Heater With 1500 Watts
- Operates quietly.
- Can be installed without disassembly.
- The Navajo white enamel finish retains an attractive appearance and is compatible with all interior decors.
- Has easy out knockouts at either end for convenient wiring.
- Stands unsupported during installation.
Product Description
The Q-Mark 25426W Electric Baseboard Heater is easily installed and designed for quiet operation. There is no popping and pinging normally associated with baseboard heaters. The 25426W has built-in safety thermal cut-off protection.
The Q-Mark 25426W electric baseboard heater has convenient wiring with the help of easy out knockouts at each end. Knockouts inside the wiring compartment allow field installation of optical raceway kit from end to end, forming UL listed wiring. UL listed for installation on wall at floor level with wall-to-wall carpeting.
During installation, the 25426W electric baseboard heater stands unsupported. The Navajo white enamel finish retains an attractive appearance and is compatible with all interior decors. The pre-notched mounting guide marks make for fast and easy installation without disassembling the unit.
Get Best Price & More info : Q-Mark 25426W Electric Baseboard Heater With 500 Watts
- Current Architectural Styling
- 16 Gauge Front Bar Grille – Std Color
- Surface or Recessed Mounting
- Built-in power disconnect switch for added safety
- Thermal overheat protector
Product Description
208 / 240v – 4000 Watts
Gently Distributes Warmth Throughout Room Area
Easily Installed; Surface or Recessed Mounting
Get Best Price & More info : Qmark Architectural Electric Wall Heater – 4000 W / 208 v
- Easily installed.
- Operates quietly without popping and pinging.
- Has built in safety thermal cut-off protection.
- The wiring is convenient.
- Is UL listed.
Product Description
The easily installed Q-Mark 2545W Electric Baseboard Heater is designed for quiet operation. There is no popping and pinging normally associated with baseboard heaters. This baseboard heater has built-in safety thermal cut-off protection.
With the easy out knockouts at each end of the Q-Mark 2545W baseboard heater you will have convenient wiring. Knockouts inside the wiring compartment allow field installation of optical raceway kit from end to end, forming UL listed wiring. UL listed for installation on wall at floor level with wall-to-wall carpeting.
The 2545W baseboard heater stands unsupported during installation. Navajo White enamel finish retains attractive appearance and is compatible with all interior decors. Pre-notched mounting guide marks for fast and easy installation without disassembling the unit.
Get Best Price & More info : Q-Mark 2545W Electric Baseboard Heater With 1250 Watts
- Silent Operation
- Easily installed without disassembly
- Navajo White enamel finish retains attractive appearance and compatible with all interior decors.
- Unit is hardwired.
Product Description
This easily installed QMark baseboard heater is designed for quiet operation…no popping and pinging normally associated with baseboard heaters. The 2516W has built-in safety thermal cut-off protection. And with the easy out knockouts at each end you will have convenient wiring. Knockouts inside the wiring compartment allow field installation of optical raceway kit from end to end, forming UL listed wiring. UL listed for installation on wall at floor level with wall-to-wall carpeting. Heater stands unsupported during installation. Navajo White enamel finish retains attractive appearance and is compatible with all interior decors. Pre-notched mounting guide marks for fast and easy installation without disassembling the unit.
Get Best Price & More info : Q-Mark 2516W Electric Baseboard Heater 1500 Watts
- Industrial, finger proof, steel intake and discharge grilles. Red Finish
- Steel spiral fin brazed to metal sheathed element for maximum heat transfer
- Built-in thermostat and Safety high temperature limit
- Built-in handle / cord storage
- 4800W Max, 20.0 AMPS, 240V
Product Description
For construction job sites, commercial workshops and other large unheated areas
Get Best Price & More info : QMark Contractor Heater (BRH482)
- Industrial, finger proof, steel intake and discharge grilles. Red Finish
- Steel spiral fin brazed to metal sheathed element for maximum heat transfer
- Built-in thermostat and Safety high temperature limit
- Built-in handle / cord storage
- 5600W Max, 23.3 AMPS, 240V
Product Description
For construction job sites, commercial workshops and other large unheated areas
Get Best Price & More info : QMark Contractor Heater (BRH562)
- Easy to install and service
- Slim surface or recessed mounting
- Three piece design
- 240V, 2000W, 8.3 AMPS
- Built-in thermal cutout, fan delay
Product Description
QMark’s high-capacity, heavy-duty fan-forced wall heaters are designed for use almost anywhere in residential, commercial or industrial areas. They perform exceptionally well in such applications as motels, entryways, playrooms, basements, workshops, garages, stores and similar large areas.
Get Best Price & More info : QMark Fan-Forced Wall Heater 2000W (LFK204)
- Built-in thermostat lets you regulate the amount of heat desired
- Maximum Wattage – 1500W
- Built-in Carrying Handles
- Model – FBE15002
- Low profile design enhances the unique appearance and adds to the units overall stability
Product Description
Dont waste energy and heat rooms you arent using. Maintain individual room control with 1500W of portable electric convector heat and get heat only in the places you want. Carrying handles are built-in to the end panels without detracting from the contemporary look of the heater. Lets you easily carry your heater from room-to-room
Get Best Price & More info : QMark Electric Convector Baseboard Heater